VTX 1300
!

Air Horns - Honda VTX1300
!
Larger picture
AHVTX13
These horns give a loud warning blast of 128 decibels. Uses the stock horn button. Can be easily installed in 30-40 minutes. The trumpets are triple plated chrome as well as the mounts and brackets so the shine and finish will last for years to come. They are completely waterproof. No cutting or drilling is required. Trumpet covers are included.

The air compressor creates instant air pressure to the horns. Since the pressure is created so fast there is no need for a storage tank as on Semi Trucks and RVs. Although the pressure is very low (12-15 psi) it delivers a large volume of air (3 CFM or cubic feet per minute). This low-pressure high volume air supply causes the diaphragm inside the horn to vibrate at a high rate of speed or *frequency* the exact speed at which it vibrates is varied by the length of the horn or trumpet. Together the horn set produces an extremely loud 128-decibel warning blast. This is approximately 4 times louder than most electric motorcycle horns, which usually rate at 87 decibels.

PASS F/BOARDS VTX1300S
!
BLV63636

PASS SW F/BOARDS VTX1300S
!
BLV64636

Electric Horn Hardware Kit - Honda VTX
!
Larger picture
EH220
Hardware kit used to install our electric horns onto Honda VTX’s. Mounts behind engine below the swing arm—hidden. Kits include a relay, fuse, all wiring, and mounting hardware along with detailed instructions.

Rider Peg Adaptor Set for Honda

!
Larger picture
PEGSHA
Peg adaptors allow you to replace your stock rider pegs with any Rivco peg set for added comfort and good looks. Fits Honda GL1800, Rune, all VTX C models

SuperBrace - Honda VTX 1300 C - 2004-2006
!
Larger picture
SB2264

SuperBrace® is the leading motorcycle fork stabilizer. This patented brace provides better stability, superior aerodynamics and a more streamlined look than other multi-piece braces on the market.

  • Reduces low and high speed wobbles

  • Improves stability in tight cornering

  • Improves tire life and reduces cupping

  • Decreases sensitivity to rough road surfaces and rain grooves

  • Each SuperBrace is designed and manufactured for each specific motorcycle.

  • Every SuperBrace is made of 6061-T6 aircraft aluminum and machined to a tolerance of +/- .002 of oan inch, with a polished finish

  • Ten minute easy installation

  • Competition proven by world class racers

VTX1300 Front Caliper Cover
!
Larger picture
VTX13003
Bolts on in minutes, covers most visible parts of calipers. Made of formed steel finished in a triple chrome plating process. Actually helps dissipate brake heat faster.

VTX1300 Rear Caliper Cover
!
Larger picture
VTX13003R
Attaches in minutes using our specially designed retaining cap nut over the bleeder bolt as well as 3M body molding adhesive strips. They cover most seen portions of the rear calipers. Formed from steel with a triple plated chrome finish. Actually helps dissipate brake heat build up faster.

VTX1300 Highway Mounts w/o Pegs
!
Larger picture
VTX13004
These mounts are Laser Cut CNC Machined Steel with a triple plated chrome finish. Includes all necessary stainless steel hardware for mounting. We have machined a *U* shaped mounting bracket that wraps around the frame down tube and attaches to a solid steel mounting block with a special pad to grip the frame securely to prevent slipping and without damaged to the frame. The arm itself is 5 inches long, but do not let this fool you, it can rotate 360 degrees, there is a series of holes in the arm and in the mounting block with a locking pin that allows over 72 DIFFERENT MOUNTING ANGLES, not to mention that it can slide up and down on the frame down tube about an inch or so.

VTX1300 Passenger Boards
!
Larger picture
VTX13005
GREAT TOURING COMFORT! Keep your passengers comfortable and happy with RIVCO's high quality triple chrome plated passenger boards. The boards themselves greatly increase passenger foot and leg support over the stock pegs. Floorboards are inlayed with anti-vibration neoprene pads.

VTX1300 Driving Lights
!
Larger picture
VTX13006
BE SAFE! BE SEEN! Give your VTX that *BIG BOY* look as well as greatly improving night vision and visibility. Compatible with all leading windshields. Visors and halogen light bulbs available. Triple plated chrome comes with on/off switch and all necessary wiring and hardware.

VTX1300 R Model Solo Rack
!
Larger picture
VTX13010
Our new Quick Detach design allows you to go back & forth between the solo rack and your passenger seat in seconds without tools. The rack is laser cut and triple chrome plated. It comes with all required stainless steel hardware & detailed mounting instructions.

VTX1300 Front Fender Bumper

!
Larger picture
VTX13011F
Great Retro Look! These fender bumpers add that classic look from days gone by. Made from high quality steel and triple chrome plated. These fender bumpers enhance the front and rear fender and gives the VTX a true Retro
look.

VTX1300 Swing Arm Cover
!
Larger picture
VTX13015
This unique part covers the right side of the swing arm on the top, bottom and outside surfaces. It is laser cut and formed from .040 steel and finished in triple chrome plating. Attaches by using the 2 brake line mounting bolts

VTX1300 Drive Shaft Cover
!
Larger picture
VTX13016
This cover is triple chrome-plated, covers the shaft, installs in minutes using the provided springs. Will not vibrate.

VTX1300 Handle Bar Risers Aluminum
!
Larger picture
VTX13017A
Aluminum finished handlebar risers for Honda VTX1300R/S Retro. These CNC Machined Billet Aluminum Risers bring the handlebars back towards the rider 1 1/2 inches and up 3/4 of an inch. This significantly reduces the riders back strain or reaching forward for the handle bars. Allows a more upright position rather than a leaning forward making long rides a pleasure. They bolt directly on in minutes. Retains the stock cables, hoses and wiring.

VTX1300 C Model Handle Bar Risers
!
Larger picture
VTX13017-C
This set of risers replaces the originals and will bring the handlebars up 1" and back toward the rider 2". While it may not sound like a lot, the 2" gives you a much more upright seating position rather than reaching over the gas tank. This will significantly reduce back, neck and shoulder fatigue. They are machined from billet aluminum and retains stock cables and hoses.

VTX1300 Tachometer Kit
!
Larger picture
VTX13018
VTX Retro Tachometer Kit. This high quality unit includes a 0-8000 RPM electronic VDO tachometer. It has a 240-degree needle sweep, black face with white numbers and an internal 12v light. The bullet shaped rear housing and mounting plate are CNC Machined from Billet Aluminum and finished in a triple plated chrome process. Installs in 20 minutes. Comes complete with all hardware, wiring and detailed, full color instructions.

VTX1300 Steering Covers

!
Larger picture
VTX13019
These steering head covers replace the unsightly black stock covers. Made from ABS plastic, triple chrome-plated, snaps in place easily and dramatically enhances the look of your bike. Covers the most visible part of the stock steering head.

VTX1300 Radiator Cover
!
Larger picture
VTX13020
Chrome Radiator Cover for the VTX1300R/S. Laser cut from formed steel and triple chrome plated. Fits securely to the perimeter of the 1300's radiator. The only radiator cover that will not interfere with engine coolng.